Home › ENGINE ยท 2AD-FHV › CHARGING › BATTERY CURRENT SENSOR

BATTERY CURRENT SENSOR > REMOVAL

for Preparation Click here



1. REMOVE BATTERY CURRENT SENSOR ASSEMBLY


    A190539
  1. Remove the nut.

  1. Remove the battery current sensor and No. 3 engine wire from the negative (-) battery terminal.



    A192586E03
  1. Disconnect the connector from the battery current sensor.

  1. Remove the battery current sensor from the No. 3 engine wire.
    Text in Illustration 
    *1
    No. 3 Engine Wire