Home › BODY ELECTRICAL › LIGHTING › SIDE TURN SIGNAL LIGHT ASSEMBLY

SIDE TURN SIGNAL LIGHT ASSEMBLY > INSPECTION

for Preparation Click here



1. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH (for Mirror Type)


    E127507
  1. Apply battery voltage to the connector and check the LED illumination condition.

    OK:
    Measurement Condition
    Specified Condition
    Battery positive (+) → Terminal 1
    Battery negative (-) → Terminal 2
    LED illuminates

    If the result is not as specified, there may be a malfunction in the side turn signal light assembly.