Home › BODY › EXTERIOR › REAR BUMPER (for Long Body)

REAR BUMPER (for Long Body) > INSTALLATION

for Preparation Click here



1. INSTALL REAR BUMPER UPPER RETAINER LH


B208580
  1. Attach the claw to install the upper retainer.

  1. Install the screw.



2. INSTALL REAR BUMPER UPPER RETAINER RH

HINT:
Use the same procedure described for the LH side.



3. INSTALL REAR BUMPER SIDE SUPPORT LH


B208579
  1. Attach the claw to install the side support.

  1. Install the 2 screws.



4. INSTALL REAR BUMPER SIDE SUPPORT RH

HINT:
Use the same procedure described for the LH side.



5. INSTALL REAR NO. 1 BUMPER REINFORCEMENT


B208578
  1. Install the bumper reinforcement with the 6 bolts.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }



6. INSTALL REAR BUMPER COVER


B208483
  1. Attach the 12 claws to install the bumper cover.

    HINT:
    The illustration only shows the LH side of the vehicle. The remaining claws are on the RH side.



    B218247
  1. w/ Rear Fender Mudguard:
    Install the 3 screws and 7 clips.



    B218248
  1. w/o Rear Fender Mudguard:
    Install the 7 screws and 7 clips.



7. INSTALL REAR QUARTER PANEL MUDGUARD LH (w/ Rear Fender Mudguard)


    B127976
  1. w/o Outside Moulding:
    Install the mudguard with the 4 screws.



    B127975
  1. w/ Outside Moulding:
    Install the mudguard with the 3 screws.



8. INSTALL REAR QUARTER PANEL MUDGUARD (w/ Rear Fender Mudguard)

HINT:
Use the same procedure described for the LH side.