REAR BUMPER (for Long Body) > REMOVAL |
| 1. REMOVE REAR QUARTER PANEL MUDGUARD LH (w/ Rear Fender Mudguard) |
![]() |
w/o Outside Moulding:
Remove the 4 screws and mudguard.
![]() |
w/ Outside Moulding:
Remove the 3 screws and mudguard.
| 2. REMOVE REAR QUARTER PANEL MUDGUARD RH (w/ Rear Fender Mudguard) |
| 3. REMOVE REAR BUMPER COVER |
![]() |
Put protective tape around the bumper cover.
Fully open the back door.
![]() |
w/ Rear Fender Mudguard:
Remove the 3 screws and 7clips.
![]() |
w/o Rear Fender Mudguard:
Remove the 7 screws and 7 clips.
![]() |
Pull the rear bumper cover to detach the 12 claws.
![]() |
Open the back door one notch and following the order in the illustration, pull down the left side of the cover, then pull down the right side of the cover and remove it by pulling it out from between the back door and body.
| 4. REMOVE REAR NO. 1 BUMPER REINFORCEMENT |
![]() |
Remove the 6 bolts and reinforcement.
| 5. REMOVE REAR BUMPER SIDE SUPPORT LH |
![]() |
Remove the 2 screws.
Using a screwdriver, detach the claw and remove the side support.
| 6. REMOVE REAR BUMPER SIDE SUPPORT RH |
| 7. REMOVE REAR BUMPER UPPER RETAINER LH |
![]() |
Remove the screw.
Using a screwdriver, detach the claw and remove the upper retainer.
| 8. REMOVE REAR BUMPER UPPER RETAINER RH |