EGR VALVE > REMOVAL |
| 1. REMOVE NO. 1 ENGINE UNDER COVER |
Remove the 6 bolts, 10 clips and engine under cover.
| 2. DRAIN ENGINE COOLANT |
Loosen the radiator drain cock plug.
Remove the radiator reservoir cap.
Loosen the cylinder block drain cock plug.

| *1 | Radiator Reservoir Cap | *2 | Radiator Reservoir |
| *3 | Cylinder Block Drain Cock | *4 | Radiator Drain Cock Plug |
| 3. REMOVE NO. 1 ENGINE COVER |
![]() |
Detach the 4 clips and remove the engine cover.
| 4. REMOVE RADIATOR SUPPORT OPENING COVER |
![]() |
Remove the 9 clips and radiator support opening cover.
| 5. REMOVE EGR VALVE BRACKET |
![]() |
Disconnect the 2 connectors and detach the wire harness clamp.
![]() |
Remove the 3 bolts and EGR valve bracket.
| 6. DISCONNECT NO. 7 WATER BY-PASS HOSE |
![]() |
| 7. DISCONNECT NO. 8 WATER BY-PASS HOSE |
![]() |
| 8. REMOVE NO. 2 EGR PIPE SUB-ASSEMBLY |
![]() |
Disconnect the electric EGR control valve connector.
![]() |
Remove the 3 bolts, 2 nuts, No. 2 EGR pipe and 2 gaskets.
| *1 | Nut |
| 9. REMOVE ELECTRIC EGR CONTROL VALVE ASSEMBLY |
![]() |
Remove the electric EGR control valve and gasket.