Home › ENGINE · 2AD-FTV › EMISSION CONTROL › EXHAUST GAS TEMPERATURE SENSOR (for DPF)

EXHAUST GAS TEMPERATURE SENSOR (for DPF) > INSPECTION

for Preparation Click here



1. INSPECT EXHAUST GAS TEMPERATURE SENSOR (for Upper Side)


    A110769E06
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    20°C (68°F)
    100 to 1000 kΩ

    Text in Illustration 
    *1
    Component without harness connected
    (Exhaust Gas Temperature Sensor)

    HINT:
    The temperature indicated in "Condition" is the temperature of the exhaust gas temperature sensor.

    If the result is not as specified, replace the exhaust gas temperature sensor (for Upper Side).



2. INSPECT EXHAUST GAS TEMPERATURE SENSOR (for Lower Side)


    A110770E05
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    20°C (68°F)
    100 to 1000 kΩ

    Text in Illustration 
    *1
    Component without harness connected
    (Exhaust Gas Temperature Sensor)

    HINT:
    The temperature indicated in "Condition" is the temperature of the exhaust gas temperature sensor.

    If the result is not as specified, replace the exhaust gas temperature sensor (for Lower Side).