Home › ENGINE ยท 2AD-FTV › INTAKE › VACUUM REGULATING VALVE

VACUUM REGULATING VALVE > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 ENGINE COVER


    A203808
  1. Detach the 4 clips and remove the engine cover.

    NOTICE:
    Attempting to disengage both front and rear clips at the same time may cause the cover to break.



2. REMOVE VACUUM REGULATING VALVE ASSEMBLY


    A206478
  1. Disconnect the 2 vacuum hoses.



    A206479
  1. Disconnect the vacuum regulating valve connector.

  1. Remove the 2 bolts and vacuum regulating valve.