Home › ENGINE ยท 2AD-FTV › EMISSION CONTROL › DIFFERENTIAL PRESSURE SENSOR (for DPF)

DIFFERENTIAL PRESSURE SENSOR (for DPF) > INSTALLATION

for Preparation Click here



1. INSTALL DIFFERENTIAL PRESSURE SENSOR ASSEMBLY


    A206308E01
  1. Connect the 2 vacuum hoses.

    NOTICE:
    Connect the vacuum hoses so that the painted marks of the 2 vacuum hoses are as shown in the illustration.



    A206439
  1. Install the sensor with the nut.

    Torque:
    6.5 N*m{ 66 kgf*cm , 58 in.*lbf }

  1. Connect the sensor connector.