Home › ENGINE · 2AD-FTV › LUBRICATION › OIL LEVEL SENSOR

OIL LEVEL SENSOR > INSPECTION

for Preparation Click here



1. INSPECT ENGINE OIL LEVEL SENSOR


    A201815E01
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1 - 2
    On
    Below 0.5 mΩ
    Off
    1 MΩ or higher

    If the result is not as specified, replace the engine oil level sensor.