OIL PRESSURE SWITCH > ON-VEHICLE INSPECTION |
| 1. INSPECT ENGINE OIL PRESSURE SWITCH ASSEMBLY |
Disconnect the engine oil pressure switch connector.
Start the engine.
![]() |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 1 - Body ground | Engine stopped | Below 1 Ω |
| Engine idling | 10 kΩ or higher |
| *1 | Component without harness connected (Engine Oil Pressure Switch) |
Connect the engine oil pressure switch connector.