Home › ENGINE ยท 2AD-FTV › EMISSION CONTROL › EGR BYPASS VALVE SWITCHING VALVE

EGR BYPASS VALVE SWITCHING VALVE > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 ENGINE COVER


    A203808
  1. Detach the 4 clips and remove the engine cover.

    NOTICE:
    Attempting to disengage both front and rear clips at the same time may cause the cover to break.



2. REMOVE NO. 1 VACUUM SWITCHING VALVE ASSEMBLY


    A201835E01
  1. Pinch the clip and pull out the VSV connector.



    A201890
  1. Disconnect the 2 vacuum hoses.

  1. Using a 4 mm hexagon socket wrench, remove the 2 bolts and VSV.