Home › ENGINE ยท 2AD-FTV › EMISSION CONTROL › EXHAUST MANIFOLD CONVERTER (for CCo)

EXHAUST MANIFOLD CONVERTER (for CCo) > REMOVAL

for Preparation Click here



1. REMOVE ENGINE ASSEMBLY
  1. Remove the engine assembly (Click here).



2. REMOVE NO. 1 MANIFOLD CONVERTER INSULATOR


    A197501
  1. Remove the 4 bolts and insulator.



3. REMOVE MANIFOLD STAY


    A197504
  1. Remove the bolt, nut and manifold stay.



4. REMOVE NO. 2 MANIFOLD STAY


    A197502
  1. Remove the 3 bolts and manifold stay.



5. REMOVE NO. 2 EXHAUST MANIFOLD STAY


    A197503
  1. Remove the 2 bolts, nut and manifold stay.



6. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY


    A197484
  1. Remove the 3 nuts, exhaust manifold converter and gasket.