Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM (for HDD)

DTC    B15A0    LAN Master Malfunction

DTC    B15AD    Navigation Processor Malfunction

DTC    B15B0    Display Screen Malfunction

DTC    B15B3    Radio Tuner Malfunction

DTC    B15B4    CD Changer Malfunction

DTC    B15B7    Bluetooth Module Malfunction

for Preparation Click here


DESCRIPTION

This DTC is stored when a malfunction occurs in the navigation receiver assembly.

DTC Code
DTC Detection Condition
Trouble Area
B15A0
Either condition is met:
  1. Bus malfunction.
  2. Sub-microprocessor malfunction.
Navigation receiver assembly
B15AD
Either condition below is met:
  1. A short to ground, short to +B or open circuit occurs in the gyro signal circuit.
  2. Gyro sensor malfunction.
B15B0
Error in picture circuit.
B15B3
Tuner communication error.
B15B4
CD player mechanical error.
B15B7
"Bluetooth" module malfunction.

INSPECTION PROCEDURE

1.CHECK FOR DTC
  1. Clear the DTCs (Click here).

  1. Recheck for DTCs and check if the same trouble occurs again.

    OK:
    No DTCs are output.



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
OK

USE SIMULATION METHOD TO CHECK (Click here)