NAVIGATION SYSTEM (for HDD) > Portable Player cannot be Connected Manually/Automatically |
| 1.CHECK CONNECTED DEVICE SETTINGS |
![]() |
Enter the "Setup" screen by pressing the "Setup" switch.
Select "Audio".
![]() |
Select "Select Portable Player".
![]() |
Check if the portable player is registered as a connected device.
| Result | Proceed to |
| The portable player is registered as a connected device. | A |
| The portable player is not registered as a connected device. | B |
|
| ||||
| A | |
| 2.CHECK SYMPTOMS |
Check the connection condition between the portable player and navigation receiver assembly.
| Result | Proceed to |
| The portable player cannot be connected manually. | A |
| The portable player cannot connect automatically. | B |
|
| ||||
| A | |
| 3.CHECK AUTOMATIC CONNECTION SETTINGS |
![]() |
Enter the "Setup" screen by pressing the "Setup" switch.
Select "Audio".
![]() |
Select "Bluetooth Audio Settings".
Check automatic connection settings of the "Bluetooth" audio.
![]() |
Check if On is displayed for "Auto Bluetooth Connect" on the "BT Audio Setting" screen.
|
| ||||
| OK | |
| 4.CHECK PORTABLE PLAYER STATUS |
Check the status of the portable player.
Check that the portable player is in standby mode.
Check that the portable player is not connected to another device (headphones, etc.).
|
| ||||
| OK | |
| 5.CHECK USING ANOTHER "BLUETOOTH" AUDIO COMPATIBLE VEHICLE OF SAME MODEL |
Check if the portable player can be connected manually/automatically on another "Bluetooth" audio compatible vehicle of the same model.
|
| ||||
| OK | |
| 6.REMOVE ADDITIONAL DEVICES WHICH USE RADIO WAVES |
Remove additional devices which use radio waves.
Check if the portable player can be connected manually/automatically.
|
| ||||
| OK | ||
| ||