2AD-FHV COOLING > SERVICE DATA |
| Condition | Specified Condition |
| Standard value opening temperature | 80 to 84°C (176 to 183°F) |
| Standard valve lift | 10 to 14 mm (0.394 to 0.551 in.) at 95°C (203°F) |
| Item | Condition | Specified Condition | |
| No. 1 cooling fan motor | 20°C (68°F) | 10.6 to 16.6 A | |
| No. 2 cooling fan motor | 20°C (68°F) | for Manual Transaxle | 7.8 to 11.8 A |
| for Automatic Transaxle | 10.6 to 16.6 A | ||
| Item | Tester Connection | Specified Condition |
| No. 1 fan relay | 3 - 5 | Standard resistance: 10 kΩ or higher |
| 3 - 5 | Standard resistance: Below 1 Ω (When battery voltage is applied to terminals 1 and 2) | |
| No. 2 fan relay | 3 - 4 | Standard resistance: Below 1 Ω |
| 3 - 5 | Standard resistance: 10 kΩ or higher | |
| 3 - 4 | Standard resistance: 10 kΩ or higher (When battery voltage is applied to terminals 1 and 2) | |
| 3 - 5 | Standard resistance: Below 1 Ω (When battery voltage is applied to terminals 1 and 2) | |
| No. 3 fan relay | 3 - 5 | Standard resistance: 10 kΩ or higher |
| 3 - 5 | Standard resistance: Below 1 Ω (When battery voltage is applied to terminals 1 and 2) |
| Item | Condition | Specified Condition |
| Radiator reservoir cap | Standard value (for brand new cap) | 93 to 123 kPa (0.95 to 1.25 kgf/cm2, 13.5 to psi) |
| Minimum standard value (after using cap) | 79 kPa (0.8 kgf/cm2, 11.4 psi) |