Home › ENGINE · 2AD-FTV › FUEL › FUEL SENDER GAUGE ASSEMBLY

FUEL SENDER GAUGE ASSEMBLY > INSPECTION

for Preparation Click here



1. INSPECT FUEL SENDER GAUGE ASSEMBLY


A209232E01
  1. Check that the float moves smoothly between F and E.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Float level is F (upper)
    13.5 to 16.5 Ω
    1 - 2
    1/2
    200.3 to 224.7 Ω
    1 - 2
    Float level is E (lower)
    405.5 to 414.5 Ω

    If the result is not as specified, replace the fuel sender gauge assembly.