FUEL SENDER GAUGE ASSEMBLY > INSPECTION |
| 1. INSPECT FUEL SENDER GAUGE ASSEMBLY |
![]() |
Check that the float moves smoothly between F and E.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 1 - 2 | Float level is F (upper) | 13.5 to 16.5 Ω |
| 1 - 2 | 1/2 | 200.3 to 224.7 Ω |
| 1 - 2 | Float level is E (lower) | 405.5 to 414.5 Ω |