Home › TRANSMISSION ยท U660F AUTOMATIC TRANSAXLE › VALVE BODY ASSEMBLY

VALVE BODY ASSEMBLY > DISASSEMBLY

for Preparation Click here



1. REMOVE TRANSMISSION WIRE


C189285
  1. Disconnect the 9 connectors and detach the transmission wire from the wire harness clamp.

  1. Remove the bolt, lock plate and transmission wire from the valve body.



2. REMOVE ATF TEMPERATURE SENSOR


C138522E03
  1. Remove the 4 bolts, clamp and ATF temperature sensor from the valve body.
    Text in Illustration 
    *1
    Clamp



    C138520
  1. Remove the O-ring from the ATF temperature sensor.



3. REMOVE SHIFT SOLENOID VALVE SL


C138523
  1. Remove shift solenoid valve SL from the valve body.



4. REMOVE SHIFT SOLENOID VALVE SLT


C206492E01
  1. Remove the lock plate and shift solenoid valve SLT from the valve body.
    Text in Illustration 
    *1
    Lock Plate



5. REMOVE SHIFT SOLENOID VALVE SLU


C206493
  1. Remove shift solenoid valve SLU from the valve body.



6. REMOVE SHIFT SOLENOID VALVE SL2


C206494E01
  1. Remove the bolt, lock plate and shift solenoid valve SL2 from the valve body.
    Text in Illustration 
    *1
    Lock Plate



7. REMOVE SHIFT SOLENOID VALVE SL1


C206495
  1. Remove shift solenoid valve SL1 from the valve body.



8. REMOVE SHIFT SOLENOID VALVE SL3


C138526E04
  1. Remove the bolt, lock plate and shift solenoid valve SL3 from the valve body.
    Text in Illustration 
    *1
    Lock Plate



9. REMOVE SHIFT SOLENOID VALVE SL4


C138527E05
  1. Remove the bolt, lock plate and shift solenoid valve SL4 from the valve body.
    Text in Illustration 
    *1
    Lock Plate