Home › TRANSMISSION ยท U660F AUTOMATIC TRANSAXLE › VALVE BODY ASSEMBLY

VALVE BODY ASSEMBLY > REASSEMBLY

for Preparation Click here



1. INSTALL SHIFT SOLENOID VALVE SL4
  1. Coat shift solenoid valve SL4 and the bolt with ATF.



    C138527E05
  1. Install shift solenoid valve SL4 to the valve body with the lock plate and bolt.

    Torque:
    11 N*m{ 110 kgf*cm , 8 ft.*lbf }

    Text in Illustration 
    *1
    Lock Plate



2. INSTALL SHIFT SOLENOID VALVE SL3
  1. Coat shift solenoid valve SL3 and the bolt with ATF.



    C138526E04
  1. Install shift solenoid valve SL3 to the valve body with the lock plate and bolt.

    Torque:
    11 N*m{ 110 kgf*cm , 8 ft.*lbf }

    Text in Illustration 
    *1
    Lock Plate



3. INSTALL SHIFT SOLENOID VALVE SL1
  1. Coat shift solenoid valve SL1 with ATF.



    C206495
  1. Install shift solenoid valve SL1 to the valve body.



4. INSTALL SHIFT SOLENOID VALVE SL2
  1. Coat shift solenoid valve SL2 and the bolt with ATF.



    C206494E01
  1. Install shift solenoid valve SL2 to the valve body with the lock plate and bolt.

    Torque:
    11 N*m{ 110 kgf*cm , 8 ft.*lbf }

    Text in Illustration 
    *1
    Lock Plate



5. INSTALL SHIFT SOLENOID VALVE SLU
  1. Coat shift solenoid valve SLU with ATF.



    C206493
  1. Install shift solenoid valve SLU to the valve body.



6. INSTALL SHIFT SOLENOID VALVE SLT
  1. Coat shift solenoid valve SLT with ATF.



    C206492E01
  1. Install shift solenoid valve SLT and the lock plate to the valve body.
    Text in Illustration 
    *1
    Lock Plate



7. INSTALL SHIFT SOLENOID VALVE SL
  1. Coat shift solenoid valve SL with ATF.



    C138523
  1. Install shift solenoid valve SL to the valve body.



8. INSTALL ATF TEMPERATURE SENSOR


C138520
  1. Coat a new O-ring with ATF and install it to the ATF temperature sensor.



    C138522E05
  1. Coat the 4 bolts with ATF.
    Text in Illustration 
    *1
    Clamp

  1. Install the ATF temperature sensor and clamp to the valve body with the 4 bolts.

    Torque:
    11 N*m{ 110 kgf*cm , 8 ft.*lbf }

    HINT:
    Each bolt length is indicated below.
    Bolt A: 25 mm (0.984 in.)
    Bolt B: 85 mm (3.35 in.)



9. INSTALL TRANSMISSION WIRE


C142570E01
  1. Coat the O-ring of the transmission wire connector with ATF.

  1. Coat the bolt with ATF.

  1. Install the transmission wire to the valve body with the lock plate and bolt.

    Torque:
    11 N*m{ 110 kgf*cm , 8 ft.*lbf }

  1. Attach the transmission wire to the wire harness clamp and connect the 9 connectors.