Home › TRANSMISSION ยท U660F AUTOMATIC TRANSAXLE › PARK / NEUTRAL POSITION SWITCH

PARK / NEUTRAL POSITION SWITCH > ADJUSTMENT

for Preparation Click here



1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY
  1. Move the shift lever to N.



    C135733E08
  1. Loosen the 2 bolts of the park/neutral position switch.

  1. Align the protrusions of the park/neutral position switch.
    Text in Illustration 
    *1
    Protrusion

  1. Hold the switch in that position and tighten the 2 bolts.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

  1. Perform the switch operation check (Click here).