TCM > INSTALLATION |
| 1. INSTALL TCM |
Install the TCM to the transaxle.
![]() |
Install and tighten the 2 bolts in the order shown in the illustration.
![]() |
Connect the TCM connector.
Turn the lock lever until the claw of the TCM connector makes a connection sound to secure the connector.
| 2. INSTALL BATTERY BRACKET REINFORCEMENT |
![]() |
Install the battery bracket reinforcement with the 2 bolts.
| 3. INSTALL FRONT BATTERY BRACKET |
![]() |
Install the front battery bracket with the 4 bolts.
Attach the 2 wire harness clamps.
| 4. INSTALL BATTERY |
Install the battery tray.
Install the battery.
Install the battery clamp with the bolt and tighten the nut.
Attach the 2 wire harness clamps.
Connect the cable to the positive (+) battery terminal.
| 5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 6. INSTALL REAR ENGINE UNDER COVER LH |
Install the under cover with the 2 clips.
| 7. INSTALL RADIATOR SUPPORT OPENING COVER |
![]() |
Install the radiator support opening cover with the 9 clips.