Home › BODY › WINDSHIELD / WINDOWGLASS › POWER WINDOW CONTROL SYSTEM

POWER WINDOW CONTROL SYSTEM > Auto Up Operation does not Fully Close Power Window (Jam Protection Function is Activated) > Preparation



EQUIPMENT
Knife
-
Piano wire
-
Plastic sheet
-
Sealer gun
-
Tape
-
Torque wrench
-
Wooden block or similar object
-


RECOMMENDED TOOLS
I104109
09061-1C300
Set, Moulding Remover
-
I104108
(09061-1C340)
Remover D, Moulding
-