Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM (for DVD)

NAVIGATION SYSTEM (for DVD) > Map Disc cannot be Inserted

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK NAVIGATION RECEIVER ASSEMBLY
  1. Check if a disc is inserted into the map disc slot.

    1. Check if "MAP" comes on.

      OK:
      "MAP" comes on.



NG
Go to step 2
OK

INSERTED DISC 

2.CHECK MAP DISC
I100152E12
  1. Check that the map disc is not deformed or cracked.

    OK:
    No deformations or cracks in the map disc.



NG
REPLACE MAP DISC
OK

GO TO "Navigation Receiver Assembly Power Source Circuit" (Click here)