Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM (for HDD)

NAVIGATION SYSTEM (for HDD) > Display does not Dim when Light Control Switch is Turned ON

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK VEHICLE SIGNAL


    E178235E03
  1. Enter the "Function Check/Setting" mode and select "Vehicle Signal" (Click here).

  1. Check that the display changes between ON and OFF according to the light control switch operation.

    OK:
    Light Control Switch Condition
    Display Condition
    TAIL or HEAD
    ON
    OFF
    OFF

    HINT:
    The display is updated once per second. It is normal for the display to lag behind the actual switch operation.



NG
GO TO "Illumination Circuit" (Click here)
OK

REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)