Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM (for HDD)

NAVIGATION SYSTEM (for HDD) > Voice Guidance does not Function

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK NAVIGATION SETTING


    E179910E01
  1. Enter the "Setup" screen by pressing the "SETUP" switch.

  1. Select "Voice".



    E179911E01
  1. Check that "Off" is not selected.

    OK:
    OFF is not selected.



NG
TURN "Auto Voice Guidance" ON
OK


2.CHECK NAVIGATION SETTING


    E179910E01
  1. Enter the "Setup" screen by pressing the "SETUP" switch.

  1. Select "Voice".



    E179922E01
  1. Check that "Auto Voice Guidance" is not off.

    OK:
    "Auto Voice Guidance" is not off.



NG
TURN "Auto Voice Guidance" ON
OK


3.CHECK NAVIGATION SETTING


    E179910E01
  1. Enter the "Setup" screen by pressing the "SETUP" switch.

  1. Select "Voice".



    E179922E02
  1. Check that "Voice Guidance in All Modes" is not off.

    OK:
    "Voice Guidance in All Modes" is not off.



NG
TURN "Voice Guidance in All Modes" ON
OK


4.CHECK NAVIGATION RECEIVER ASSEMBLY
  1. Check that audio can be heard from the speakers.

    OK:
    Audio can be heard.



NG
GO TO "Speaker Circuit" (Click here)
OK

REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)