NAVIGATION SYSTEM (for HDD) > Screen Flicker or Color Distortion |
| 1.CHECK DISPLAY SETTING |
![]() |
Enter the display adjustment screen by pressing the "DISPLAY" switch.
Reset display settings (contrast and brightness) and check that the screen appears normal.
![]() |
Press the "SETUP" switch and then select "General."
![]() |
Set "Line Color" to "Green" (initial setting) and check if the display returns to normal.
|
| ||||
| OK | ||
| ||
| 2.CHECK CABIN |
Check that the cabin temperature is higher than -20°C (-4°F).
|
| ||||
| OK | |
| 3.CHECK COLOR BAR |
![]() |
Enter the "Function Check/Setting" mode and select "Color Bar" (Click here).
Check that the color bars match the displayed names.
|
| ||||
| OK | ||
| ||