FUEL INJECTOR > REMOVAL |
| 1. DISCHARGE FUEL SYSTEM PRESSURE |
![]() |
Remove the console box (Click here).
Start the engine. After the engine has stopped, turn the ignition switch off.
Check that the engine does not start.
Remove the fuel tank cap, and let the air out of the fuel tank.
![]() |
Connect the connector.
Install the console box (Click here).
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE INTAKE AIR SURGE TANK ASSEMBLY |
Remove the intake air surge tank assembly (Click here).
| 4. DISCONNECT FUEL MAIN TUBE |
![]() |
Remove the No. 2 fuel pipe clamp.
Pinch the tube connector and then pull out the fuel pipe.
| 5. REMOVE FUEL INJECTOR ASSEMBLY |
![]() |
Disconnect the 6 injector connectors.
![]() |
Remove the 5 bolts and fuel delivery pipe together with the 6 injectors.
![]() |
Remove the 6 insulators from the intake manifold.
![]() |
Pull out the 6 fuel injectors from the fuel delivery pipe.
Remove the O-ring from each fuel injector.