Home › TRANSMISSION ยท K111F CVT › OIL COOLER

OIL COOLER > REMOVAL



1. REMOVE NO. 1 ENGINE UNDER COVER


    A206200
  1. Remove the 6 screws, 10 clips and under cover.



2. DRAIN ENGINE COOLANT


    A195000E02
  1. Install a vinyl hose to the drain cock plug on the radiator side.



  1. Loosen the radiator drain cock plug.


    A207900E01

    HINT:
    Collect the coolant in a container and dispose of it according to the regulations in your area.

  1. Remove the radiator reservoir cap.

    CAUTION:
    Do not remove the radiator reservoir cap while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.

  1. Loosen the water drain cock plug.



3. DISCONNECT WATER BY-PASS HOSE


C203373
  1. Disconnect the 2 water by-pass hoses from the oil cooler.



4. REMOVE NO. 1 OIL COOLER INLET HOSE AND NO. 1 OIL COOLER OUTLET HOSE


C203374
  1. Disconnect the 2 oil cooler hoses from the oil cooler and transaxle, and remove them.



5. REMOVE OIL COOLER


C203375
  1. Remove the 3 bolts and oil cooler from the continuously variable transaxle.