Home › ENGINE ยท 2GR-FE › FUEL › FUEL PRESSURE PULSATION DAMPER

FUEL PRESSURE PULSATION DAMPER > INSTALLATION

for Preparation Click here



1. INSTALL FUEL PRESSURE PULSATION DAMPER
  1. Apply a light coat of spindle oil or gasoline to a new O-ring, and install it to the pulsation damper.

  1. Install the pulsation damper to the fuel delivery pipe.

  1. Install the clip.



2. INSTALL INTAKE AIR SURGE TANK ASSEMBLY
  1. Install the intake air surge tank assembly (Click here).



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


4. INSPECT FOR FUEL LEAK

HINT:
.