Home › ENGINE ยท 2GR-FE › FUEL › FUEL PRESSURE PULSATION DAMPER

FUEL PRESSURE PULSATION DAMPER > REMOVAL

for Preparation Click here



1. DISCHARGE FUEL SYSTEM PRESSURE

HINT:
(Click here).



2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



3. REMOVE INTAKE AIR SURGE TANK ASSEMBLY
  1. Remove the intake air surge tank assembly (Click here).



4. REMOVE FUEL PRESSURE PULSATION DAMPER


A134150E01
  1. Remove the clip.

  1. Pull out the fuel pressure pulsation damper from the fuel delivery pipe.