FRONT SEAT SIDE AIRBAG ASSEMBLY > DISPOSAL |
| 1. DISPOSE OF FRONT SEAT SIDE AIRBAG ASSEMBLY (WHEN INSTALLED IN VEHICLE) |
![]() |
Check if SST is functioning properly.
![]() |
Connect the SST's red clip to the positive (+) battery terminal and the black clip to the negative (-) battery terminal.
![]() |
Press the SST activation switch, and check that the LED of the SST activation switch illuminates.
Disconnect SST from the battery.
Follow the "Precaution" (Click here).
Disconnect the cable from the negative (-) battery terminal.
Manual seat:
Remove the front seat .
Power seat:
Remove the front seat .
Install SST.
Disconnect the connector (yellow colored one) from the front seat side airbag.
![]() |
Connect the SST connector to the front seat side airbag connector.
Manual seat:
Install the front seat .
Power seat:
Install the front seat .
![]() |
Move the SST at least 10 m (33 ft.) away from the vehicle front side window.
Maintaining enough clearance for the SST wire harness in the front side window, close all doors and windows of the vehicle.
Connect the SST's red clip to the battery positive (+) terminal and the black clip to the battery negative (-) terminal.
Deploy the airbag.
Check that no one is inside the vehicle or within a 10 m (33 ft.) radius of the vehicle.
Press the SST activation switch and deploy the airbag.
| 2. DISPOSE OF FRONT SEAT SIDE AIRBAG ASSEMBLY (WHEN NOT INSTALLED IN VEHICLE) |
![]() |
Check if SST is functioning properly.
Remove the front seat side airbag.
Manual seat:
Remove the front seat .
Power seat:
Remove the front seat .
Remove the 2 nuts and front seat side airbag from the seatback.
![]() |
Using a service-purpose wire harness for the vehicle, tie down the front seat side airbag to the tire.
![]() |
Install the 2 nuts to the front seat side airbag assembly.
![]() |
Wind the wire harness around the stud bolts of the front seat side airbag as shown in the illustration.
![]() |
Position the front seat side airbag inside the tire.
Install SST.
![]() |
Connect the SST connector to the front seat side airbag connector.
![]() |
Place the tires.
Place at least 2 tires under the tire to which the front seat side airbag is tied.
Place at least 2 tires over the tire to which the front seat side airbag is tied. The top tire should have the disc wheel installed.
![]() |
Tie the tires together with 2 wire harnesses.
Install SST.
![]() |
Connect the SST connector.
Deploy the airbag.
Connect the SST's red clip to the battery positive (+) terminal and the black clip to the battery negative (-) terminal.
Check that no one is within a 10 m (33 ft.) radius of the tire to which the front seat side airbag is tied.
Press the SST activation switch and deploy the airbag.
![]() |
Dispose of the front seat side airbag.
Remove the front seat side airbag from the tire.
Place the front seat side airbag in a plastic bag, tie it tightly and dispose of it in the same way as other general parts.