Home › RESTRAINTS › SUPPLEMENTAL RESTRAINT SYSTEM › CURTAIN SHIELD AIRBAG ASSEMBLY

CURTAIN SHIELD AIRBAG ASSEMBLY > ON-VEHICLE INSPECTION

for Preparation Click here



1. CHECK CURTAIN SHIELD AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)


    B137329E01
    B137328E01
  1. Perform a diagnostic system check (Click here).

  1. With the curtain shield airbag assembly installed on the vehicle, perform a visual check. If any of the defects mentioned below are present, replace the curtain shield airbag with a new one:

    1. Cuts, minute cracks or marked discoloration on the curtain shield airbag assembly.

      CAUTION:
      For removal and installation of the curtain shield airbag, be sure to follow the correct procedure.



2. CHECK CURTAIN SHIELD AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)
  1. Perform a diagnostic system check (Click here).



    B137330E01
    B137331E01
  1. With the curtain shield airbag removed from the vehicle, perform a visual check. If there are any defects as mentioned below, replace the curtain shield airbag with a new one:

    1. Cuts, minute cracks or marked discoloration on the curtain shield airbag.
    2. Cracks or other damage to the connectors.

    CAUTION:
    For removal and installation procedures of the curtain shield airbag, be sure to follow the correct procedure.