CRUISE CONTROL SYSTEM > TC and CG Terminal Circuit |

| 1.CHECK WIRE HARNESS (DLC3 - ECM AND BODY GROUND) |
![]() |
Disconnect the E16 DLC3 connector.
Disconnect the A12 ECM connector.
Measure the resistance of the wire harness side connectors.
| Tester Connection | Specified Condition |
| E16-13 (TC) - A12-27 (TC) | Below 1 Ω |
| E16-4 (CG) - Body ground |
| Tester Connection | Specified Condition |
| E16-13 (TC) - A12-41 (TC) | Below 1 Ω |
| E16-4 (CG) - Body ground |
|
| ||||
| OK | ||
| ||