Home
›
ENGINE · 2GR-FE
›
ENGINE CONTROL SYSTEM
›
CRANKSHAFT POSITION SENSOR
CRANKSHAFT POSITION SENSOR > INSPECTION
for Preparation
Click here
1. INSPECT CRANKSHAFT POSITION SENSOR
Measure the resistance according to the value(s) in the table below.
Standard resistance:
Temperature
Specified Condition
Cold
1,630 to 2,740 Ω
Hot
2,065 to 3,225 Ω
HINT:
"Cold" and "Hot" mean the temperature of the coils themselves. "Cold" is from -10 to 50°C (14 to 122 °F) and "Hot" is from 50 to 100°C (122 to 212°F).
If the resistance is not as specified, replace the sensor.