AUTOMATIC TRANSAXLE SYSTEM > TERMINALS OF ECM |
| CHECK ECM |

Measure the voltage of the ECM connector.
| Symbols (Terminal No.) | Wiring Color | Terminal Description | Condition | Specified Condition |
| STAR (B32-52) - E1 (B32-104) | W - BR | Park/Neutral position switch signal | Ignition switch on (IG) and shift lever on P or N | Below 2 V |
| STAR (B32-52) - E1 (B32-104) | W - BR | Park/Neutral position switch signal | Ignition switch on (IG) and shift lever not on P or N | 10 to 14 V |
| P (B32-73) - E1 (B32-104) | L - BR | P shift position switch signal | Ignition switch on (IG) and shift lever on P | 10 to 14 V |
| P (B32-73) - E1 (B32-104) | L - BR | P shift position switch signal | Ignition switch on (IG) and shift lever not on P | Below 1 V |
| R (B32-53) - E1 (B32-104) | R - BR | R shift position switch signal | Ignition switch on (IG) and shift lever on R | 10 to 14 V |
| R (B32-53) - E1 (B32-104) | R - BR | R shift position switch signal | Ignition switch on (IG) and shift lever not on R | Below 1 V |
| N (B32-54) - E1 (B32-104) | Y - BR | N shift position switch signal | Ignition switch on (IG) and shift lever on N | 10 to 14 V |
| N (B32-54) - E1 (B32-104) | Y - BR | N shift position switch signal | Ignition switch on (IG) and shift lever not on N | Below 1 V |
| D (B32-56) - E1 (B32-104) | B - BR | D shift position switch signal | Ignition switch on (IG) and shift lever on D or 3 | 10 to 14 V |
| D (B32-56) - E1 (B32-104) | B - BR | D shift position switch signal | Ignition switch on (IG) and shift lever not on D or 3 | Below 1 V |
| 3 (A12-26) - E1 (B32-104) | P - BR | 3 shift position switch signal | Ignition switch on (IG) and shift lever on 3 | 10 to 14 V |
| 3 (A12-26) - E1 (B32-104) | P - BR | 3 shift position switch signal | Ignition switch on (IG) and shift lever not on 3 | Below 1 V |
| 2 (B32-55) - E1 (B32-104) | P - BR | 2 shift position switch signal | Ignition switch on (IG) and shift lever on 2 and L | 10 to 14 V |
| 2 (B32-55) - E1 (B32-104) | P - BR | 2 shift position switch signal | Ignition switch on (IG) and shift lever not on 2 and L | Below 1 V |
| L (B32-74) - E1 (B32-104) | LG - BR | L shift position switch signal | Ignition switch on (IG) and shift lever on L | 10 to 14 V |
| L (B32-74) - E1 (B32-104) | LG - BR | L shift position switch signal | Ignition switch on (IG) and shift lever not on L | Below 1 V |
| STP (A12-36) - E1 (B32-104) | L - BR | Stop light switch signal | Brake pedal is depressed | 10 to 14 V |
| STP (A12-36) - E1 (B32-104) | L - BR | Stop light switch signal | Brake pedal is released | Below 1 V |
| SL1+ (B32-57) - SL1- (B32-77) | V - P | SL1 solenoid signal | Engine idle speed | Pulse generation (see waveform 1) |
| SL2+ (B32-58) - SL2- (B32-59) | Y - L | SL2 solenoid signal | Engine idle speed | Pulse generation (see waveform 2) |
| DSL (B32-79) - E01 (B32-45) | G - W-B | DSL solenoid signal | Vehicle speed 65 km/h (40 mph), lock-up (ON to OFF) | Below 1 V |
| DSL (B32-79) - E01 (B32-45) | G - W-B | DSL solenoid signal | Vehicle driving under lock-up position | Pulse generation (see waveform 3) |
| SLT+ (B32-76) - SLT- (B32-75) | R - GR | SLT solenoid signal | Engine idle speed | Pulse generation (see waveform 4) |
| S4 (B32-78) - E01 (B32-45) | W - W-B | S4 solenoid signal | Ignition switch on (IG) | Below 1 V |
| S4 (B32-78) - E01 (B32-45) | W - W-B | S4 solenoid signal | O/D gear | 10 to 14 V |
| S4 (B32-78) - E01 (B32-45) | W - W-B | S4 solenoid signal | Not on O/D gear | Below 1 V |
| THO1 (B32-72) - ETHO (B32-95) | LG - BR | ATF temperature sensor signal | ATF temperature: 115°C (239°F) or more | Below 1.5 V |
| NT+ (B32-125) - NT- (B32-124) | W - R | Speed sensor (NT) signal | Vehicle speed 20 km/h (12 mph) | Pulse generation (see waveform 5) |
| NC+ (B32-101) - NC- (B32-102) | R - W | Speed sensor (NC) signal | Vehicle speed 30 km/h (19 mph): (3rd gear) Engine speed 1,400 rpm | Pulse generation (see waveform 6) |
![]() |
Using an oscilloscope, check the waveform 1.
| Item | Content |
| Symbols (Terminal No.) | SL1+ (B32-57) - SL1- (B32-77) |
| Tool Setting | 5 V/DIV., 1 msec./DIV. |
| Condition | Engine idle speed |
![]() |
Using an oscilloscope, check the waveform 2.
| Item | Content |
| Symbols (Terminal No.) | SL2+ (B32-58) - SL2- (B32-59) |
| Tool Setting | 5 V/DIV., 1 msec./DIV. |
| Condition | Engine idle speed |
![]() |
Using an oscilloscope, check the waveform 3.
| Item | Content |
| Symbols (Terminal No.) | DSL (B32-79) - E01 (B32-45) |
| Tool Setting | 10 V/DIV., 100 msec./DIV. |
| Condition | Vehicle speed 65 km/h (40 mph), lock-up (ON to OFF) |
![]() |
Using an oscilloscope, check the waveform 4.
| Item | Content |
| Symbols (Terminal No.) | SLT+ (B32-76) - SLT- (B32-75) |
| Tool Setting | 5 V/DIV., 1 msec./DIV. |
| Condition | Engine idle speed |
![]() |
Using an oscilloscope, check the waveform 5.
| Item | Content |
| Symbols (Terminal No.) | NT+ (B32-125) - NT- (B32-124) |
| Tool Setting | 5 V/DIV., 0.5 msec./DIV. |
| Condition | Vehicle speed 20 km/h (12 mph) |
![]() |
Using an oscilloscope, check the waveform 6.
| Item | Content |
| Symbols (Terminal No.) | NC+ (B32-101) - NC- (B32-102) |
| Tool Setting | 1 V/DIV., 1 msec./DIV. |
| Condition | Vehicle speed 30 km/h (19 mph): (3rd gear) Engine speed 1,400 rpm |