Home › TRANSMISSION ยท U151F AUTOMATIC TRANSAXLE › AUTOMATIC TRANSAXLE SYSTEM

AUTOMATIC TRANSAXLE SYSTEM > TERMINALS OF ECM

for Preparation Click here



CHECK ECM

C171925E02

  1. Measure the voltage of the ECM connector.

    HINT:
    Each ECM terminal's standard voltage is shown in the table below.
    In the table, first follow the information under "Condition". Look under "Terminal No. (Symbols)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".
    Use the illustration above as a reference for the ECM terminals.


    Terminal No. (Symbols)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    B96-62 (NSW) - B96-81 (E1)
    G-R - BR
    Park neutral switch signal
    Ignition switch ON and shift lever P and N position
    Below 2 V
    Ignition switch ON and shift lever except P and N position
    11 to 14 V
    B96-24 (P) - B96-81 (E1)
    R - BR
    P shift position switch signal
    Ignition switch ON and shift lever P position
    11 to 14 V
    Ignition switch ON and shift lever except P position
    Below 1 V
    B96-25 (R) - B96-81 (E1)
    B - BR
    R shift position switch signal
    Ignition switch ON and shift lever R position
    11 to 14 V
    Ignition switch ON and shift lever except R position
    Below 1 V
    B96-27 (N) - B96-81 (E1)
    L-B - BR
    N shift position switch signal
    Ignition switch ON and shift lever N position
    11 to 14 V
    Ignition switch ON and shift lever except N position
    Below 1 V
    B96-26 (D) - B96-81 (E1)
    L - BR
    D shift position switch signal
    Ignition switch ON and shift lever D or 4 position
    11 to 14 V
    Ignition switch ON and shift lever except D or 4 position
    Below 1 V
    A12-25 (4) - B96-81 (E1)
    P - BR
    4 shift position switch signal
    Ignition switch ON and shift lever 4 position
    11 to 14 V
    Ignition switch ON and shift lever except 4 position
    Below 1 V
    B96-29 (3) - B96-81 (E1)
    LG - BR
    3 shift position switch signal
    Ignition switch ON and shift lever 3 position
    11 to 14 V
    Ignition switch ON and shift lever except 3 position
    Below 1 V
    B96-28 (2) - B96-81 (E1)
    V - BR
    2 shift position switch signal
    Ignition switch ON and shift lever 2 and L position
    11 to 14 V
    Ignition switch ON and shift lever except 2 and L position
    Below 1 V
    A12-26 (L) - B96-81 (E1)
    V - BR
    L shift position switch signal
    Ignition switch ON and shift lever L position
    11 to 14 V
    Ignition switch ON and shift lever except L position
    Below 1 V
    A12-36 (STP) - B96-81 (E1)
    L - BR
    Stop light switch signal
    Brake pedal is depressed
    Between 11 V and 14 V
    Brake pedal is released
    Below 1 V
    B96-16 (SL1+) - B96-17 (SL1-)
    P - LG
    SL1 solenoid signal
    Engine idle speed
    Pulse generation
    (see waveform 1)
    Ignition switch ON
    Pulse generation
    (see waveform 1)
    1st gear
    Pulse generation
    (see waveform 1)
    Except 1st gear
    Below 1 V
    B96-12 (SL2+) - B96-13 (SL2-)
    BR - R
    SL2 solenoid signal
    Engine idle speed
    Pulse generation
    (see waveform 2)
    Ignition switch ON
    Pulse generation
    (see waveform 2)
    1st or 2nd gear
    Pulse generation
    (see waveform 2)
    3rd, 4th or 5th gear
    Below 1 V
    B96-14 (SL3+) - B96-15 (SL3-)
    GR - G-R
    SL3 solenoid signal
    Engine idle speed
    Pulse generation
    (see waveform 3)
    Ignition switch ON
    Pulse generation
    (see waveform 3)
    1st or 2nd gear
    Pulse generation
    (see waveform 3)
    3rd, 4th or 5th gear
    Below 1 V
    B96-9 (DSL) - B96-22 (E01)
    V - BR
    DSL solenoid signal
    Vehicle speed 65 km/h (40 mph), lock-up (ON to OFF)
    Below 1 V
    Vehicle driving under lock-up position
    Pulse generation
    (see waveform 4)
    B96-11 (SLT+) - B96-10 (SLT-)
    L - W
    SLT solenoid signal
    Engine idle speed
    Pulse generation
    (see waveform 5)
    B96-8 (SR) - B96-22 (E01)
    G - BR
    SR solenoid signal
    Ignition switch ON
    Below 1 V
    3th, 4th or 5th gear
    11 to 14 V
    1st or 2nd gear
    Below 1 V
    B96-7 (S4) - B96-22 (E01)
    L-B - BR
    S4 solenoid signal
    Ignition switch ON
    Below 1 V
    5th gear
    11 to 14 V
    Except 5th gear
    Below 1 V
    B96-126 (THO1) - B96-124 (ETHO)
    Y - B
    ATF temperature sensor signal
    ATF temperature 115°C (239°F) or more
    Below 1.5 V
    B96-6 (NT+) - B96-5 (NT-)
    B - G
    Speed sensor (NT) signal
    Vehicle speed 20 km/h (12 mph)
    Pulse generation
    (see waveform 6)
    B96-4 (NC+) - B96-3 (NC-)
    W - Y
    Speed sensor (NC) signal
    Vehicle speed 30 km/h (19 mph) (3rd gear)
    Engine speed 1,400 rpm
    Pulse generation
    (see waveform 7)



  2. C140833E01
  3. Using an oscilloscope, check the waveform 1.

    Waveform 1 (Reference):
    Item
    Content
    Symbols
    SL1+ - SL1-
    Tool Setting
    5 V/DIV., 1 msec./DIV.
    Condition
    Engine idle speed



  4. C140833E01
  5. Using an oscilloscope, check the waveform 2.

    Waveform 2 (Reference):
    Item
    Content
    Symbols
    SL2+ - SL2-
    Tool Setting
    5 V/DIV., 1 msec./DIV.
    Condition
    Engine idle speed



  6. C140833E01
  7. Using an oscilloscope, check the waveform 3.

    Waveform 3 (Reference):
    Item
    Content
    Symbols
    SL3+ - SL3-
    Tool Setting
    5 V/DIV., 1 msec./DIV.
    Condition
    Engine idle speed



  8. C133935E01
  9. Using an oscilloscope, check the waveform 4.

    Waveform 4 (Reference):
    Item
    Content
    Symbols
    DSL - E01
    Tool Setting
    10 V/DIV., 100 msec./DIV.
    Condition
    Vehicle speed 65 km/h (40 mph), lock-up (ON to OFF)



  10. C140833E01
  11. Using an oscilloscope, check the waveform 5.

    Waveform 5 (Reference):
    Item
    Content
    Symbols
    SLT+ - SLT-
    Tool Setting
    5 V/DIV., 1 msec./DIV.
    Condition
    Engine idle speed



  12. C140853E01
  13. Using an oscilloscope, check the waveform 6.

    Waveform 6 (Reference):
    Item
    Content
    Symbols
    NT+ - NT-
    Tool Setting
    5 V/DIV., 0.5 msec./DIV.
    Condition
    Vehicle speed 20 km/h (12 mph)



  14. C140854E01
  15. Using an oscilloscope, check the waveform 7.

    Waveform 7 (Reference):
    Item
    Content
    Symbols
    NC+ - NC-
    Tool Setting
    1 V/DIV., 1 msec./DIV.
    Condition
    Vehicle speed 30 km/h (19 mph) (3rd gear)
    Engine speed 1,400 rpm