Home › BODY › SEAT › FRONT POWER SEAT LUMBAR SWITCH

FRONT POWER SEAT LUMBAR SWITCH > INSPECTION

for Preparation Click here



1. INSPECT FRONT POWER SEAT LUMBAR SWITCH (for LHD)


    B068208E05
  1. Measure the resistance between the terminals when the switch is operated.

    Standard resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    3 (B) - 4 (H)
    HOLD
    Below 1 Ω
    1 (R) - 2 (E)
    HOLD
    Below 1 Ω
    1 (R) - 2 (E)
    OFF
    Below 1 Ω
    4 (H) - 5 (E)
    OFF
    Below 1 Ω
    1 (R) - 3 (B)
    RELEASE
    Below 1 Ω
    4 (H) - 5 (E)
    RELEASE
    Below 1 Ω

    If the result is not as specified, replace the switch.



2. INSPECT FRONT POWER SEAT LUMBAR SWITCH (for RHD)


    B135607E02
  1. Measure the resistance between the terminals when the switch is operated.

    Standard resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    3 (B) - 4 (H)
    HOLD
    Below 1 Ω
    1 (R) - 2 (E)
    HOLD
    Below 1 Ω
    1 (R) - 2 (E)
    OFF
    Below 1 Ω
    4 (H) - 5 (E)
    OFF
    Below 1 Ω
    1 (R) - 3 (B)
    RELEASE
    Below 1 Ω
    4 (H) - 5 (E)
    RELEASE
    Below 1 Ω

    If the result is not as specified, replace the switch.