DTC P0604 Internal Control Module Random Access Memory (RAM) Error |
DTC P0606 ECM / PCM Processor |
DTC P060A Internal Control Module Monitoring Processor Performance |
DTC P060D Internal Control Module Accelerator Pedal Position Performance |
DTC P060E Internal Control Module Throttle Position Performance |
DTC P0657 Actuator Supply Voltage Circuit / Open |
DTC P1607 Cruise Control Input Processor |
| DTC No. | DTC Detection Condition | Trouble Area |
| P0604 P0606 P060A P060D P060E P0657 P1607 | ECM internal error (1 trip detection logic) | ECM |
| 1.CHECK WHETHER DTC OUTPUT RECURS |
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG) and turn the tester ON.
Select the following menu items: Powertrain / Engine and ECT / DTC.
Read the DTC.
| Display (DTC output) | Proceed to |
| DTC P0604, P0606, P060A, P060D, P060E, P0657 and/or P1607 is output | A |
| DTC is not output | B |
|
| ||||
| A | ||
| ||