DTC B2277 Detecting Vehicle Submersion |
| DTC Code | DTC Detection Condition | Trouble Area |
| B2277 | Submersion circuit monitor inside the main body ECU detects that the vehicle is submerged in water. | Main body ECU |
| 1.CHECK WHETHER DTC OUTPUT RECURS |
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG) and turn the intelligent tester on.
Enter the following menus: Body / Main Body / DTC.
Clear the DTCs.
Check whether DTC B2277 recurs 270 to 330 seconds or more after the engine switch is turned on (IG).
|
| ||||
| OK | ||
| ||