Home › BODY › WINDSHIELD / WINDOWGLASS › POWER WINDOW CONTROL SYSTEM

POWER WINDOW CONTROL SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



CHECK DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch on (IG) and turn the tester ON.

  3. Select the following menu items: Body / Power Window / DTC.

  4. Check the DTC(s).


CLEAR DTC
E124614E01
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch on (IG) and turn the tester ON.

  3. Select the following menu items: Body / Power Window / DTC / Clear.

  4. Press the YES button.

  5. Check that "DTCs are cleared" is displayed.

    NOTICE:
    If any DTCs are output, troubleshoot those DTCs again.