Home › ENGINE ยท 3ZR-FAE › STARTING › ENTRY AND START SYSTEM

ENTRY AND START SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



CHECK DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG) and turn the intelligent tester ON.

  3. Select the following menu items: Body / Main Body / DTC.

  4. Check DTCs and write them down.

    HINT:
    For further information about using the intelligent tester, refer to the instruction manual.

  5. Confirm the details of the DTCs.


CLEAR DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG) (do not start the engine) and turn the intelligent tester ON.

  3. Select the following menu items: Body / Main Body / DTC.

    HINT:
    Refer to the intelligent tester operator's manual for further details.

  4. Clear DTCs by pressing the YES button on the tester.

    HINT:
    For further information about using the intelligent tester, refer to the instruction manual.