Home › ENGINE ยท 1AZ-FE › STARTING › IGNITION SWITCH (w/o Entry and Start System)

IGNITION SWITCH (w/o Entry and Start System) > INSTALLATION

for Preparation Click here



1. INSTALL IGNITION SWITCH ASSEMBLY


    A124915
  1. Install the ignition switch with the 2 screws.



    A124916
  1. Install the ignition key cylinder light connector.

  1. Install the ignition switch connector.



2. INSTALL STEERING COLUMN COVER LOWER


    A134309
  1. Attach the 4 claws to install the steering column lower cover.



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL