STARTER (for 1.7 kW Type) > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. DISCONNECT CABLE FROM POSITIVE BATTERY TERMINAL |
| 3. REMOVE BATTERY CLAMP |
![]() |
Remove the bolt and loosen the nut.
Detach the 2 wire harness clamps.
Detach the hook of the battery clamp from the battery bracket front, and then remove the battery clamp.
| 4. REMOVE BATTERY INSULATOR |
| 5. REMOVE BATTERY |
| 6. REMOVE FRONT BATTERY BRACKET |
![]() |
Detach the 2 wire harness clamps.
Remove the 4 bolts and bracket front.
| 7. REMOVE BATTERY BRACKET REINFORCEMENT |
![]() |
Remove the 2 bolts and reinforcement bracket.
| 8. REMOVE STARTER ASSEMBLY |
![]() |
Disconnect the starter connector.
Open the terminal cap, remove the nut and disconnect the starter wire.
![]() |
Remove the 2 bolts and starter.