STARTER > DISASSEMBLY |
| 1. REMOVE MAGNETIC SWITCH ASSEMBLY |
![]() |
Remove the nut and disconnect the lead wire from the magnetic switch.
![]() |
Remove the 2 screws holding the magnetic switch to the starter drive housing.
Remove the magnetic switch.
Remove the return spring and plunger from the starter drive housing.
| 2. REMOVE STARTER YOKE ASSEMBLY |
![]() |
Remove the 2 through-bolts, and pull out the starter yoke together with the commutator end frame.
![]() |
Remove the starter yoke from the commutator end frame.
| 3. REMOVE STARTER ARMATURE PLATE |
![]() |
Remove the armature plate from the starter yoke.
| 4. REMOVE STARTER COMMUTATOR END FRAME COVER |
![]() |
Using a screwdriver, pry out the commutator end frame cover.
| 5. REMOVE STARTER ARMATURE ASSEMBLY |
![]() |
Using snap ring pliers, remove the snap ring and plate washer.
Remove the armature from the commutator end frame.
| 6. REMOVE PLANETARY GEAR |
![]() |
Remove the 3 planetary gears from the starter drive housing.