STEERING PAD (for 1AZ-FE, 2AZ-FE) > ON-VEHICLE INSPECTION |
| 1. CHECK STEERING PAD ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION AND AIRBAG NOT DEPLOYED) |
![]() |
Perform a diagnostic system check (Click here).
With the steering pad (with airbag) installed on the vehicle, perform a visual check:
Check for cuts, cracks or discoloration on the steering pad outer surface and in the grooved portion.
If any of the defects mentioned above are present, replace the steering pad with a new one.
| 2. CHECK STEERING PAD ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG NOT DEPLOYED) |
![]() |
Perform a diagnostic system check (Click here).
With the steering pad (with airbag) removed from the vehicle, perform a visual check:
![]() |
![]() |