Home
›
ENGINE ยท 2GR-FE
›
ENGINE CONTROL SYSTEM
›
SFI SYSTEM
DTC P1602 Deterioration of Battery
for Preparation
Click here
DESCRIPTION
The ECM determines the battery power according to the voltage of the BATT terminal while the engine is running (not cranking).
DTC No.
DTC Detection Condition
Trouble Area
P1602
Battery power is 0%
Battery
ECM back-up power source circuit
INSPECTION PROCEDURE
1.INSPECT CHARGING SYSTEM
Inspect the charging system (
Click here
).
NG
REPAIR OR REPLACE CHARGING SYSTEM
OK
CHECK ECM POWER SOURCE CIRCUIT (BACK-UP POWER SOURCE CIRCUIT) (
Click here
)