Home › BRAKE › BRAKE › FRONT BRAKE

FRONT BRAKE > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedures listed below are for the LH side.



1. REMOVE FRONT WHEEL


2. DRAIN BRAKE FLUID

NOTICE:
Wash off brake fluid immediately if it comes in contact with any painted surface.



3. DISCONNECT FRONT FLEXIBLE HOSE


C127057
  1. Remove the union bolt and gasket.

  1. Disconnect the flexible hose from the brake cylinder.



4. REMOVE DISC BRAKE CYLINDER ASSEMBLY LH


C127058
  1. Remove the 2 bolts and cylinder.