Home › TRANSMISSION ยท CLUTCH › CLUTCH PEDAL (for LHD)

CLUTCH PEDAL (for LHD) > REASSEMBLY

for Preparation Click here



1. INSTALL PEDAL SPRING HOOK


C125489E03
  1. Apply MP grease to the contact surface of the hook.

  1. Install the hook.



2. INSTALL CLUTCH PEDAL TURNOVER BUSH


C125488E04
  1. Apply MP grease to the contact surface of the bush.

  1. Install the bush.

  1. Install the 2 cushions to the clutch pedal.



3. INSTALL CLUTCH PEDAL SPRING WITH HOOK


C125487E02
  1. Apply MP grease to the contact surface of the hook.

  1. Install the hook to the clutch pedal.



4. INSTALL COLLAR


C125486E02
  1. Apply MP grease to both sides of a new collar and 2 new bushes.

  1. Install the collar.

  1. Install the 2 bushes.



5. INSTALL CLUTCH PEDAL SUB-ASSEMBLY


C125484
  1. Install the clutch pedal to the clutch pedal support with the bolt and nut.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }

    HINT:
    Install the bolt from the right side of the vehicle.



    C125483E03
  1. Install the clutch pedal return spring.



6. INSTALL CLUTCH PEDAL SPRING HOLDER


C125485E02
  1. Apply MP grease to the contact surface of the clutch pedal spring holder.

  1. Install the clutch pedal spring holder.



7. INSTALL CLUTCH PEDAL SPRING


C125482E02
  1. Apply MP grease to the contact surface of the clutch pedal.

  1. Install the spring.



8. INSTALL CLUTCH START SWITCH ASSEMBLY (w/ Entry and Start System)
  1. Install the clutch start switch with the nut.

    Torque:
    16 N*m{ 160 kgf*cm , 12 ft.*lbf }

  1. Connect the clutch start switch connector.



9. INSTALL CLUTCH SWITCH ASSEMBLY (w/ Cruise Control System)
  1. Install the clutch switch with the nut.

    Torque:
    16 N*m{ 160 kgf*cm , 12 ft.*lbf }

  1. Connect the clutch switch connector.