SIDE TURN SIGNAL LIGHT ASSEMBLY > REMOVAL |
| 1. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY LH (for Fender Type) |
![]() |
Detach the 2 claws and remove the light as shown in the illustration.
Disconnect the connector and remove the side turn signal light.
| 2. REMOVE OUTER REAR VIEW MIRROR SUB-ASSEMBLY LH (for Mirror Type) |
![]() |
Using a moulding remover, detach the 4 claws and remove the mirror.
![]() |
w/ Mirror Heater:
Disconnect the 2 connectors.
| 3. REMOVE OUTER MIRROR COVER LH (for Mirror Type) |
![]() |
Using a screwdriver, detach the 8 claws and remove the mirror cover.
| 4. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY LH (for Mirror Type) |
![]() |
Remove the 2 screws and side turn signal light.
Disconnect the connector.