HIGH MOUNTED STOP LIGHT ASSEMBLY > INSTALLATION |
| 1. INSTALL CENTER STOP LIGHT ASSEMBLY |
![]() |
Install the center stop light with the 2 screws.
Connect the connector.
| 2. INSTALL REAR SPOILER |
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
If reusing the spoiler:
Clean the spoiler.
Using a heat light, heat the spoiler.
Connect the center stop light connector.
![]() |
Install the spoiler with 3 clips.
![]() |
Install the 3 bolts.
| 3. INSTALL BACK DOOR CENTER GARNISH |
![]() |
Attach the 4 claws and 4 clips to install the garnish.
| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |